Search Results

Search found 30514 results on 1221 pages for '10 04'.

Page 66/1221 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73 | Next Page >

VMWare ESXi virtual machine can contact the gateway but not the DNS server

- by Nathan Palmer

I am having a bit of a strange issue. I have a VMWare ESXi server with two virtual machines running on it. They are running just fine and can communicate on the network without a problem. I am now trying to add a third. I am installing Ubuntu 8.04 Server. I assign it a static IP address and it's a fresh installation. Once installed I can ping the gateway but I cannot ping the DNS server. It's on the same network with the other two VMs which are communicating just fine. I have tried to reinstall the operating system but it still fails to connect. Here is /etc/network/interfaces auto eth0 iface eth0 inet static address 192.168.1.23 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 208.67.222.222 #opendns dns-search mydomain.com Here is route Destination | Gateway | Genmask | Flags | Metric | Ref | Use | Iface localnet | * | 255.255.255.0 | U | 0 | 0 | 0 | eth0 default | 192.168.1.1 | 0.0.0.0 | UG | 100 | 0 | 0 | eth0 Since I'm running this behind a FortiGate this is what the sniff command gives me when I try to ping 208.67.222.222 arp who-has 192.168.1.1 tell 192.168.1.23 arp reply 192.168.1.1 is-at MAC 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request As you can see it looks like I never get a response. One interesting thing I notice is the arp reply's MAC doesn't look right. I have cleared the FortiGate's ARP cache though and checked the entry and it seems correct. The MAC it lists is the one for the router. However if I ping from a different virtual machine that is also Ubuntu 8.04 with a nearly identical configuration I get this. 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply So, what could I be missing? Thanks.

Read the article
Cloudstack virtual machines can't communicate with virtual routers when they are on different hosts

- by Jorge Suárez de Lis

I'm using Cloudstack 2.2.14 on a Ubuntu 10.04 set of hosts, and I have a problem on my setup. I have two hosts running. When a virtual router is created on host 1 and a virtual machine using that virtual router is created on host 2, or vice versa, I have no connectivity at all on the virtual machine. First of all, I have to setup the network manually on that virtual machine -usually DHCP is working, but not here-. Then, I can't ping to the virtual router from the virtual machine or vice versa. When both virtual router and virtual machine are created on the same host, everything works! Maybe those packages are being filtered somehow? I have no clue on how to proceed. Both hosts can communicate directly outside the virtualization.

Read the article
Ubuntu 10.04 server delay responding to AJAX requests

- by DanielAttard

I manage a Ubuntu 10.04 server with a couple of domains hosted on it. As I continue to learn more about all these wonderful new (for me), one issue that I have begun to notice is the delay it sometimes takes for the server to respond to certain requests. As an example, when I view the timeline of events using firebug I can see that most of the time when I make a POST, the server responds in under 100ms. Sometimes, however, there is a substantial delay before the RESPONSE from the server. I can't seem to tell when the delay will happen and when it won't, however, when it happens the delay is always for about 4.5 seconds. The delay seems to happen about 30-40% of the time. Here is the section of apache2.conf dealing with logs: # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent I have no idea where to look to try and debug this problem or investigate further. Any suggestions?

Read the article
Why does this package (ppa:ondrej/php5, it's PHP 5.5) break the apache2 installation?

- by Panique

Problem Currently this package (ppa:ondrej/php5) is quite popular for installing the latest version of PHP 5.5. I've worked quite much with it, and everything ran smoothy, on several (dev) servers. But from today (?) this breaks the apache2 installation (it empties the /etc/apache2/sites-available/default file). This is reproduceable. Way to reproduce (on naked Ubuntu 64 12.04 LTS) // basic installs sudo apt-get update sudo apt-get install apache2 sudo apt-get install php5 Apache is fine, nano /etc/apache2/sites-available/default has valid content now // getting PHP 5.5.x sudo apt-get install python-software-properties (for add-apt-repository) sudo add-apt-repository ppa:ondrej/php5 sudo apt-get update sudo apt-get install php5 // php -v shows successful install of PHP 5.5.x now Apache is broken, nano /etc/apache2/sites-available/default is empty now Question Why does this happen ? According to https://launchpad.net/~ondrej/+archive/php5 there were no changes in the last few days.

Read the article
samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

- by Sylvain Huard

I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

Read the article
Antialias not working in ubuntu lucid lynx 10.04

- by mac

I have recently upgraded from karmic to lucid (plain ubuntu using gnome). Everything worked fine, but the characters now aren't anti-aliased any more, as you can appreciate from the screenshot: This is what I tried to fix the situation, unluckily without succeeding: Used the regular option pane from System-Preference-Appearance-Font (smoothing, hinting...) Edited the .fonts.conf file Disinstalling (and then re-installing) the mstcorefont package Changing the default Sans font to a font of my liking (e.g. Tahoma) from the abovementioned Appearance options My ubuntu installation is quite standard, with the typical add-ons one might wish for usability. I used the ubuntu start script to make a few tweaks. Thank you in advance for your help! :)

Read the article
Updating Dell PowerEdge firmware on Ubuntu?

- by Shtééf

The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

Read the article
How to format DVD-RAM?

- by AndrejaKo

I have few DVD-RAM disks and when using udftools, specifically sudo mkudffs --media-type=dvdram /dev/sr0 where /dev/sr0 is my DVD-RAM drive, I get trying to change type of multiple extents and nothing happens. What should I do? EDIT After trying with dvd+tools, here's what I got: #dvd+rw-format /dev/dvd -format=full -ssa=default * BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1. * 4.6GB DVD-RAM media detected. * formatting 54.8| And same error as before from mkudffs.

Read the article
Gwibber on Ubuntu doesn't open

- by Radian

Gwibber Doesn't open . When I tried to Open it from Command Line I got this error ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:3752): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' No dbus monitor yet Updating... ERROR:dbus.proxies:Introspect error on com.Gwibber.Service:/com/gwibber/Service: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) Traceback (most recent call last): File "/usr/bin/gwibber", line 67, in client.Client() File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 447, in init self.w = GwibberClient() File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 29, in init self.model = gwui.Model() File "/usr/lib/python2.6/dist-packages/gwibber/gwui.py", line 43, in init self.services = json.loads(self.daemon.GetServices()) File "/usr/lib/pymodules/python2.6/dbus/proxies.py", line 68, in call return self._proxy_method(*args, **keywords) File "/usr/lib/pymodules/python2.6/dbus/proxies.py", line 140, in call **keywords) File "/usr/lib/pymodules/python2.6/dbus/connection.py", line 620, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) I tried to remove it and to Install again but It has the same error It was Working probably , then suddenly it didn't

Read the article
bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

- by leeand00

I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

Read the article
Is it possible to mount a hot-swappable drive when it is turned on?

- by John

In my PC, I have a hot-swap drive. Usually I keep it off to save power. I only really use it when accessing from another PC on the network. Is it possible to configure /etc/fstab to mount this drive when I turn it on (without having to shake the mouse, open file manager and click the drive to have it mounted? Currently, I have: UUID=a869e5ca-7d3b-4d64-91e2-eadbecd8c9e5 /media/i-TVShows ext4 rw,nosuid,nodev,auto,user,uhelper=udisks 0 0 in my /etc/fstab file but it doesn't seem to do the trick. I want the drive to be user-mountable, on power on, with RW access, and I'm thinking of adding 'nofail'...this is my first time writing to the fstab file, and a lot of the parameters I took from the output of 'mount' so feel free to correct any oddness you find. Thanks

Read the article
how do i uninstall reviewboard

- by TheIG

reviewboard on ubuntu VM

Read the article
Free Hosting control panel

- by John Maxim

I'm in the mid of researching for one of the best hosting control panels. The server I run is Ubuntu and I have some experience with ISPConfig 2 & 3. Since I haven't explored any others available, what are the recommended ones for an Ubuntu server? I asked because I find that there seems to be some disabling and modifications required for an Ubuntu server if I need to use ispconfig which causes the server to change its actual way of running. It's quite good though, but any more recommended ones ? Something more organic? which doesn't require much breaking and changing. I'm not asking for the simple one, I don't mind going extra mile to install a powerful one but just try sticking with most Ubuntu's conventions will be an ideal one for me. And of course, if there happens to be something that meets the requirement as mentioned "Ubuntu conventions" and also simple to install at the same time, that'd be a bonus. Thanks in advance.

Read the article
Firefox 3.6 in Ubuntu 9.04 doesn't work without proxy

- by sev

I'm on Ubuntu 9.04. I've updated Firefox with ubuntuzilla. Now Firefox forks only via proxy. How can I fix this?

Read the article
Repair grub mbr and /boot using ubuntu 9.04 live CD

- by rschuler

I have broken my boot sequence on my XP/Vista/Ubuntu box. I wish to restore the system back to the way that Ubuntu 9.04 (last installed OS) had it setup. I want to do only the mbr and /boot on the ubuntu partition and leave the rest of the system alone. How can I do this using the ubuntu 9.04 live CD?

Read the article
Installing PHP Imagick with libmagickcore4

- by Ali

I have ImageMagick (version 6.6.9-7) on Ubuntu 12.04, which has libmagickcore4. When I tried to install PHP imagick, I received the following error: The following packages have unmet dependencies: php5-imagick : Depends: libmagickcore3 (>= 8:6.6.0.4) but it is not installable Depends: libmagickwand3 (>= 8:6.6.0.4) but it is not installable E: Unable to correct problems, you have held broken packages. Apparently, the problem is that php5-imagick is based on libmagickcore3 but a newer verion has been installed on my Ubuntu. Is there a way to instruct PHP imagick to use libmagickcore4?

Read the article
PXE boot not happening due to DHCP issue .

- by Nishant

I could PXE boot this laptop to some extent yesterday but all of a sudden after some time it started to show this error message . I reinstalled my tftp server etc in between . It seems that DHCP lease issue is happening . The client wants some specific address I think ? How to resolve List item Client requested address 0.68.101.98 [06/06 04:37:27.658] no more address or address previously allocated by another server [06/06 04:37:27.658] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:29.670] Client requested address 0.68.101.98 [06/06 04:37:29.670] no more address or address previously allocated by another server [06/06 04:37:29.670] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:33.679] Client requested address 0.68.101.98 [06/06 04:37:33.679] no more address or address previously allocated by another server [06/06 04:37:33.679] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:41.699]

Read the article
Ubuntu issues when moving hard disk to new system

- by Tim

I'm working on a legacy project with a small single board computer running Ubuntu 10.04 on a compact flash card. I need to be able to save away a working image (via dd) and copy said image to other compact flash cards for use in other single board computers (with identical hardware) I'm able to copy the image to other flash cards and bootup on other systems no problem. But I'm seeing strange behavior. For instance, I can't use sudo on the new system (“sudo: must be setuid root”). I've gone down the path of trying to fix this, but have run into a slew of other issues. General question is: what do I need to be aware of when moving a hard disk containing Ubuntu (in my case a compact flash card) to another computer? I was hoping it would be seamless to Ubuntu since it's moving to a system with identical hardware. Is there something that needs to be done to make it "portable"?

Read the article
How do I redirect the kernel console output on Ubuntu 10.04

- by lorin

When I reboot my Ubuntu 10.04 nodes, I'd like to be able to see the kernel boot messages when connecting to the IPMI interfaces using Serial Over LAN mode (ttyS0). What do I need to do to be able to redirect these messages to ttyS0? Ideally, I'd like them to also still appear in the usual place (tty0, I think) for when I plug a monitor directly into the box.

Read the article
Administer postgres from PGAdmin on remote mac using ssh tunnel

- by Aidan Ewen

I've got PostgreSQL installed on a Ubuntu server and I'm trying to connect to that server using PGAdmin on a remote macbook. I've created an ssh tunnel - macbook:~postgres$ ssh -L 5423:localhost:5432 [email protected] And I can connect using psql on the macbook as expected - macbook:~ me$ psql -U postgres -p 5423 -h localhost ... postgres=# In the 'New Server Registration' window on PGAdminIII I'm entering the following credentials - Name - MyServer Host - localhost Port - 5423 Maintenance DB - postgres Username - postgres Password - <remote_postgres_password> However the connection fails - Error connecting to the server: FATAL: password authentication failed for user "postgres" Not sure what's going on here, these seem to be the same credentials I've used for psql.

Read the article
Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

- by Fantomas

Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

Read the article
VMWare Server 2.0.2 on Ubuntu 10.04?

- by Robert S. Barnes

Does VMWare's free Server 2.0.2 run on Ubuntu 10.04 yet? Or do they have a similar free product that runs' on Ubuntu 10.04?

Read the article
Ubuntu Lucid: Erratic screen behaviour after boot

- by fgysin

In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

Read the article
Compile PHP 5.3.2 with intl extension on Snow Leopard 10.6.3

- by fsb

Does anyone have some tips on compiling PHP's intl extension on PHP? I'm getting compile errors each way I try it and I've been googling for ages and getting nowhere. Any help greatly appreciated. When make gets to the huge gcc command to compile libphp5.bundle, I get the following error: Undefined symbols: "___gxx_personality_v0", referenced from: icu_4_2::MessageFormatAdapter::getArgTypeList(icu_4_2::MessageFormat const&, int&)in msgformat_helpers.o _umsg_parse_helper in msgformat_helpers.o _umsg_format_arg_count in msgformat_helpers.o _umsg_format_helper in msgformat_helpers.o CIE in msgformat_helpers.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libs/libphp5.bundle] Error 1 My compile commands are: MACOSX_DEPLOYMENT_TARGET=10.6 CFLAGS="-arch x86_64 -g -Os -pipe -no-cpp-precomp" CCFLAGS="-arch x86_64 -g -Os -pipe" CXXFLAGS="-arch x86_64 -g -Os -pipe" LDFLAGS="-arch x86_64 -bind_at_load" export CFLAGS CXXFLAGS LDFLAGS CCFLAGS MACOSX_DEPLOYMENT_TARGET ./configure --prefix=/usr \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --sysconfdir=/private/etc \ --with-apxs2=/usr/sbin/apxs \ --enable-cli \ --with-config-file-path=/etc \ --with-libxml-dir=/usr \ --with-openssl=/usr \ --with-zlib=/usr \ --with-bz2=/usr \ --with-curl=/usr \ --with-gd \ --with-jpeg-dir=/src/jpeg/jpeg-local \ --with-png-dir=/usr/X11R6 \ --with-freetype-dir=/usr/X11R6 \ --with-xpm-dir=/usr/X11R6 \ --with-ldap=/usr \ --with-ldap-sasl=/usr \ --enable-mbstring \ --enable-mbregex \ --with-mysql=mysqlnd \ --with-mysqli=mysqlnd \ --with-pdo-mysql=mysqlnd \ --with-mysql-sock=/var/mysql/mysql.sock \ --with-iodbc=/usr \ --enable-shmop \ --with-snmp=/usr \ --enable-soap \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --with-xmlrpc \ --with-iconv-dir=/usr \ --with-xsl=/usr \ --with-pcre-regex=/src/pcre/pcre-local/usr/local \ --with-pcre-dir=/src/pcre/pcre-local/usr/local \ --with-icu-dir=/usr/local \ --enable-intl export EXTRA_CFLAGS="-lresolv" make

Read the article
Is the field BusID necessary in XF86Config?

- by Greg

Hello, I am using a cluster of machines running on Ubuntu 10.04 LTS which are supposed to be homogeneous, but apparently they are not. In particular, I am configuring the X server on these machines, and I pushed a /etc/X11/XF86Config that includes the following section: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BusID "PCI:5:0:0" EndSection The problem is that the BusID of the graphic card is PCI:5:0:0 for some machines, and PCI:3:0:0 for others. Is there a way that the X server automatically detects the appropriate Device (based on the name for instance)? Thanks,

Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73 | Next Page >